What types of materials can be processed by a sheet laser cutting machine
Different laser cutting machines can process different types of materials, which is very important. So what materials can the sheet metal laser cutting machine process? Let's give you a brief introduction. special-purpose sheet metal laser cutting machine can cut the following materials: 1, structural steel. This type of material will get better cutting results when it is cut with oxygen. When oxygen is used as a processing auxiliary gas, the cutting edge will be slightly oxidized. For plates with a thickness of 4mm, nitrogen can be used as a processing auxiliary gas for high-pressure cutting. In this case, the cutting edge will not be oxidized. For plates with a thickness of more than 10mm, using a special pole plate for the laser and oiling the surface of the workpiece during processing can achieve better results. 2, stainless steel. The gas that must be used for cutting stainless steel: oxygen is used, in the case of edge oxidation is not concerned; nitrogen is used to obtain a non-oxidized and burr-free edge, no other additional treatment is required. Coating the oil film on the surface of the board will get a better perforation effect without reducing the processing quality. 3. Aluminum profile. Although it has high reflectivity and thermal conductivity, aluminum with a thickness of 6mm or less can be cut, depending on the alloy type and laser capability. When cutting with oxygen, the cutting surface is rough and hard. When using nitrogen, the cutting surface is smooth. Pure aluminum is very difficult to cut because of its high purity, and aluminum can be cut only when the system is equipped with a reflective absorptionu0026rdquo; device. Otherwise, the reflection will destroy the optical components. Wuhan Gaoneng Laser Equipment Manufacturing Co., Ltd. is a high-tech enterprise integrating Ru0026D, production and sales of professional laser complete sets of equipment. Not only successfully developed laser equipment with advanced technology, but also used self-support import and export rights to promote products to more than forty global products including Hong Kong, South Korea, Vietnam, Malaysia, Thailand, Australia, the United States, Japan, Germany, the Netherlands, Jordan, etc. The country has an advantage in the international market in the same industry.