What factors will affect the accuracy of the laser cutting machine

An important criterion for judging whether the performance of a laser cutting machine is good is the cutting accuracy of the laser cutting machine. If the cutting accuracy of a laser cutting machine is better, it means that its performance is better, and customers are more optimistic about such a laser cutting machine. However, in fact, the cutting accuracy of a laser cutting machine will be affected by some factors. What are the specific factors to listen to the analysis of Wuhan High Energy Laser. At present, the cutting accuracy of a laser cutting machine is mainly affected by four factors. Let's take a look at it together: 　　 First is the aggregation problem of the laser beam in the laser generator. The smaller the focused spot, the better the cutting accuracy. It is high, especially the slit is small. With the current technology of our factory, the light spot can reach 0.01mm.　　The second is the accuracy of the table. The higher the accuracy, the higher the cutting accuracy.　　 Then, since the laser beam is condensed into a cone, when cutting, the cone is downward. If the thickness of the workpiece is large, the accuracy will be reduced and the slit will be larger.　　 Finally, using a laser cutting machine to cut different materials will also affect the cutting accuracy of the laser cutting machine. In the same situation, stainless steel has a higher cutting accuracy than aluminum, and the cut surface is smoother.　　 The above are several important factors that affect the cutting accuracy of laser cutting machines. I believe everyone knows well after reading the introduction. When choosing a laser cutting machine, you can also choose the laser cutting machine you need based on the above points. At the same time, the manufacturer can also work hard from these points to make your shovel more perfect and better.