The laser cutting machine needs to be cleaned up every day

The laser cutting machine that plays an important role in daily production work does not need to be said that everyone knows. But how many people have cleaned up the laser cutting machine after operating the laser cutting machine every day? Presumably many operations are forgotten when they are used up. This has a relatively large impact on the service life of the laser cutting machine, so for the laser cutting machine, daily cleaning and maintenance work is very important. The daily cleaning work of the laser cutting machine mainly includes the following aspects: 　　 pay attention to cleaning the lens, guide rail, and cleaning the workbench every day. Let’s take a look at the lens cleaning method: when cleaning the lens, absolute ethanol or 98% content must be used. Alcohol is used as a cleaning solution. Use a small amount of absorbent cotton to lightly moisten the alcohol and scrub the lens in a directional direction. Finally, use dry cotton to gently wipe the lens to make the lens bright and transparent. Damaged) 　　 The cleaning method of the guide rail: first remove the dirt and processing debris on the guide rail, and then add a little clean lubricant on the guide rail, and move the guide rail so that the clean lubricant can be evenly distributed on the guide rail. (Be careful not to thicker lubricating oil (butter). This kind of lubricating oil attached to the guide rail can easily cause the sticking and twisting of processed materials and dust, so as to damage the slider and the guide rail). Cleaning method of the working platform: The working platform has zinc-iron alloy, honeycomb, crawler, blade and other workbenches. First, clean the processing debris on the workbench. The crawler workbench needs to add a little bit of anti-rust oil on the crawler after half a year. The next anti-rust treatment is not needed for other workbenches. (Note that the work platform cannot be cleaned easily with water, it is easy to make the workbench rust and accelerate the oxidation of the work. 　　 Regularly clean the exhaust fan and the smoke pipe to keep it clean; The method of cleaning the exhaust fan and the smoke pipe: When there is a large amount of smoke during processing, it needs to be cleaned For the fan, remove the cover of the fan, use thin wood to scrape away the dust on the fan blades and the wind channel, and then use a high-pressure air gun to blow off the dust. The method of cleaning the smoke pipe is the same as that of the exhaust fan. 　　 Wuhan High Energy Laser Equipment Manufacturing Co., Ltd. is a high-tech enterprise integrating Ru0026D, production and sales of professional laser complete sets of equipment. Not only has it successfully developed laser equipment with advanced technology, but also used its own import and export rights to promote its products to Hong Kong, South Korea, and Vietnam. , Malaysia, Thailand, Australia, the United States, Japan, Germany, the Netherlands, Jordan and more than 40 countries around the world.