The air compressor of the metal laser cutting machine needs key maintenance

The air compressor of the metal laser cutting machine is an important part of the laser cutting machine. It is very important for the laser cutting machine. Therefore, in normal times, the maintenance of the air compressor of the metal laser cutting machine is very important. Now we will tell you how to maintain the air compressor of the metal laser cutting machine.　　In order to ensure the normal operation of the metal laser cutting machine, the maintenance and workmanship of its air compressor should be done as follows: 　　1, air filter element. Under normal circumstances, the dust and impurities on the surface of the air filter element should be removed every 500 hours, and check whether it needs to be replaced every 2000 hours. The inspection or replacement cycle can be extended or shortened according to the dust content.　　2, intake valve seals. The air compressor of the laser cutting machine should be checked every 4000 hours of operation, and the sealing ring should be replaced if necessary.　　 3. Compressor lubricant. It is necessary to check whether the lubricating oil is sufficient every 1000 hours, and replace the new oil every 4000 hours.　　 4. Oil filter. New parts should be replaced every 2000 hours.　　 5. Oil-steam separator. New parts need to be replaced every 4000 hours.　　 6. Minimum pressure valve. Clean it every 4000 hours and check whether the opening pressure is normal.　　7, safety valve. Every 4000 hours check whether its movements are sensitive.　　 8. Oil drain valve. Moisture and dirt are discharged every 2000 hours.　　 9. Transmission belt. Adjust the tightness every 2000 hours, check the wear and tear every 4000 hours, and decide whether to replace it according to the wear and tear.　　 10. Motor maintenance. Perform maintenance according to the motor operating instructions.　　 Wuhan Gaoneng Laser Equipment Manufacturing Co., Ltd. is a high-tech enterprise integrating Ru0026D, production and sales of professional laser complete sets of equipment. Not only successfully developed laser equipment with advanced technology, but also used self-support import and export rights to promote products to more than 40 global markets including Hong Kong, South Korea, Vietnam, Malaysia, Thailand, Australia, the United States, Japan, Germany, the Netherlands, Jordan, etc. nation.