Some small accessories that are easily overlooked for metal laser cutting machines

Many people can talk about the metal laser cutting machine in a straightforward way, but when it comes to some of the small accessories, they don't know much, because some small accessories are always easy to be ignored by people. However, these easily overlooked small accessories play an important role in the normal operation of the metal laser cutting machine. Let's give you a brief introduction below.　　In the metal laser cutting machine, its main function is to deal with the smooth flow of the beam emitted by the laser in the entire channel. It sweeps the laser beam clean, clean air, and dry environment. In order to ensure that the laser beam reaches the material, as much as possible to reduce unnecessary loss, this is a typical advance device.　　 Slag discharge machine. In the metal laser cutting machine, every piece of equipment has this device, which is used to deal with the waste generated during laser processing, such as cutting edge material, leftover material, etc. The slag discharge machine is just its name, it is It is used to pack the expense materials together for processing and undertake the aftermath work.　　 Gas tank. It is used to store air, and it is used to compress air during laser cutting machine processing to facilitate the improvement of the cutting effect. The ultimate goal of this device is to improve the cutting effect, otherwise its existence will lose its meaning, so The gas tank in the laser cutting machine is a device during work, that is, a good device.　　 Synchronous belt. Every metal laser cutting machine has a component belt, which is called timing belt in the word of laser cutting machine. I believe everyone knows its function. In each laser cutting machine, the configuration is different, and the number of timing belts is also different. However, the tightness of the timing belt is also the decisive key. If it is too loose, then there will be ghosting in the case of cutting, and the cutting effect will not be able to achieve satisfactory results. If the timing belt is too tight, it will cause the timing belt to accelerate wear and reduce its service life. Therefore, in the laser cutting machine, debugging the timing belt is also a key and a technology. The metal laser cutting machine is in use. , It is necessary to regularly check the tightening of the timing belt to facilitate debugging and achieve the best cutting effect. This is the key. The debugging method, each laser cutting machine has a timing belt tensioning screw, so every week It is necessary to periodically check whether the timing belt is sent or tight. To improve the cutting effect of the metal laser cutting machine, the timing belt is also a key component, so it cannot be ignored.　　It is not difficult to see from the above four size parts that in the metal laser cutting machine, each part has its own value and significance. Therefore, the maintenance of the small parts of the metal laser cutting machine should not be underestimated.　　 Wuhan Gaoneng Laser Equipment Manufacturing Co., Ltd. is a high-tech enterprise integrating Ru0026D, production and sales of professional laser complete sets of equipment. Not only successfully developed laser equipment with advanced technology, but also used self-support import and export rights to promote products to more than forty global products including Hong Kong, South Korea, Vietnam, Malaysia, Thailand, Australia, the United States, Japan, Germany, the Netherlands, Jordan, etc. nation.