Solutions to four common problems of laser cutting machines

We know that as long as it is a machine, there will always be some problems in the actual production work. If the maintenance is good, there will be fewer failures. Otherwise, failures will occur frequently, so what problems might the laser cutting machine encounter in actual production work? Let's take a look together.　　 Under normal circumstances, there are four main problems that laser cutting machines often encounter in daily sound field work: the machine does not operate, the pump does not work normally, the pump suction is insufficient, and there is no cooling or insufficient cooling. The solutions to these frequently-occurring problems are as follows: 　　 1. The machine does not operate (no refrigeration or pump does not work). Check whether the power cord is connected to the power plug; check whether the power switch is turned on; check whether the panel power is turned on.　　2, the pump is not working properly. Check the liquid level of the entire system to ensure that the pump is receiving liquid; check whether the pump motor is running; check whether the circulation system is blocked; 　　3, the pump suction is insufficient. Check whether the voltage is too low; check whether the pipe diameter is too small; check whether the fluid viscosity is too high; check whether the connecting pipe is restricted.　　 4. No refrigeration or insufficient refrigeration. Check whether the voltage is too low or too high; check whether the ventilation is blocked; check the ambient temperature (too high ambient temperature will cause the refrigeration compressor to stop for a short time); check whether too much heat is transferred to the cooling liquid, because of this Will exceed the cooling capacity of the refrigeration system.　　 Wuhan Gaoneng Laser Equipment Manufacturing Co., Ltd. is a high-tech enterprise integrating Ru0026D, production and sales of professional laser complete sets of equipment. Not only successfully developed laser equipment with advanced technology, but also used self-support import and export rights to promote products to more than forty global products including Hong Kong, South Korea, Vietnam, Malaysia, Thailand, Australia, the United States, Japan, Germany, the Netherlands, Jordan, etc. nation.