Several standards to measure the cutting quality of laser cutting machines
At present, the application of laser cutting machine is very extensive, and its market prospect is also very broad. However, the cutting quality of different laser cutting machines is different, even if the cutting quality of two same laser cutting machines is not exactly the same sometimes. Then from which aspects should we usually judge the cutting quality of the laser cutting machine? Laser beam principle: The laser beam is focused into a small spot with its smallest diameter, so that the focal point can reach a high power density. At this time, the heat input by the beam far exceeds the part that is reflected, conducted or diffused by the material, and the material is quickly heated to the vaporization temperature and evaporates to form a hole. As the beam and the material move relatively linearly, the holes continuously form slits with a very narrow width. The heat effect of trimming is very small, and there is basically no deformation of the workpiece. In addition, let’s share that the cutting quality of a laser cutting machine can be measured by the following standards. 1. Cutting surface roughness 2. Cutting slag size 3. Cutting edge perpendicularity and slope 4. Cutting edge round angle size 5. After stripe drag Wuhan High Energy Laser Equipment Manufacturing Co., Ltd. is a professional laser complete set of equipment research and development, A high-tech enterprise integrating production and sales. Not only successfully developed laser equipment with advanced technology, but also used self-support import and export rights to promote products to more than forty global products including Hong Kong, South Korea, Vietnam, Malaysia, Thailand, Australia, the United States, Japan, Germany, the Netherlands, Jordan, etc. nation.