Market scale and trend analysis of laser missed printing templates

In the laser misprint template market, the main product is SMT laser template. There are three manufacturing methods for the template, namely laser cutting, electroforming, and chemical etching. The main disadvantage of electroforming is that it is difficult to obtain an electroforming layer of uniform thickness on the surface of the core mold with a complex profile, and defects such as scratches on the surface will also be copied to the electroforming product, and the production cycle is long. The disadvantage of etching is that it does not have good printing capabilities and smooth fine-pitch and ultra-fine-pitch components. The emergence of laser stencils just made up for the deficiencies of etching and electroforming.　　 China's SMT market can be divided into several main application areas of network communication, consumer electronics and computers according to application areas, accounting for more than 90% of the total market share.　　 According to data from the Ministry of Industry and Information Technology, network communications is a large application market. The market scale reached RMB 13.9 billion in 2009, accounting for 36.3% of the total market share. Among them, mobile phones account for a large proportion, which is expected to reach 20%.　　 Data from the China Electronic Components Industry Association shows that China’s huge consumer electronics product base can meet the consumer electronics needs of the SMT market, with a market size of 11.22 billion yuan, accounting for 29.3% of the total market share.　　 According to statistics from Gartner, a world-renowned market research organization, as the global computer industry gradually moves into China, China has become the world's largest production base for personal computers, notebook computers and monitors. Board and card products have contributed greatly to the development of the SMT market, including motherboards, graphics cards, sound cards and network cards. The scale of the computer part of the SMT market reached 11.94 billion yuan, accounting for 31.2% of the total market share.　　 The demand for SMT templates in my country has shown a rapid growth trend this year. The average growth rate should be maintained at about 15%, reaching 686,000 in 2009 and 1.06 million in 2012. Since the SMT laser miss-printing template directly supplies the PCB production and manufacturing needs, the demand for the SMT laser template can be estimated based on the PCB production and sales in China, and the PCB board used by a single mobile phone is calculated based on 1 square meter PCB board supporting 210 mobile phones. It is 0.0047 square meters. Considering that the average PCB area of u200bu200bmobile phones is small and the PCB usage of mobile phones only accounts for 20% of the total PCB output, we speculate that the PCB area used per unit of electronic products is 0.01 square meters. China's PCB production is 16.5 billion pieces. At the same time, taking into account factors such as the sharing of one SMT template for multiple PCB boards and the shorter and shorter update cycle of electronic products, it is estimated that each SMT template is used about 27,000 times. Therefore, we predict that the output of SMT templates in 2008 will be about 613,000, 3.75 100 million yuan. The output in 2009 increased by 12% year-on-year to 686,000 pieces. Taking into account the economic cycle, the price dropped by 7%. The market size is expected to be 390 million yuan. Similarly, it is predicted that the output in 2012 will reach 1.06 million pieces, and the market size is expected to be 540 million yuan. The compound growth rate of SMT laser templates from 2006 to 2012 was 9.1%. This is mainly because PCB production in China is already a relatively mature industry, and the growth is indeed relatively limited.　　 my country has now become the world’s largest production base for personal computers, notebook computers and monitors. Board and card products are a major contributor to the development of the SMT market, including motherboards, graphics cards, sound cards and network cards. The Chinese SMT market can be divided into several major industries: network communications, consumer electronics, and computers according to application areas. These industries account for more than 90% of the total market share. The main companies in this field include the following: Shenzhen Sunshine Optoelectronics Technology Co., Ltd., accounting for approximately 12.53% of the market share. The company has certain advantages over peer companies in terms of technology research and development, sales network, service support, and equipment. In the laser template market, it ranks first in the domestic market and the second in the world. It is a company that started ultraviolet laser molding early in China, and is probably one year ahead of other companies. Guanghong Optoelectronics Technology (Shenzhen) Co., Ltd. has approximately 12.00% of the market share, Musen Laser Electronic Technology Co., Ltd. has approximately 7.20% of the market share, Shenzhen Yunshengji Electronics Co., Ltd. has approximately 4.27% of the market share, and Shenzhen Zhuo Ruida Electronics Co., Ltd. accounts for approximately 3.20% of the market share.　　According to the statistics of China Circuit Board Association, at present, the output value of the global PCB industry accounts for more than a quarter of the total output value of the electronic component industry. At the same time, due to its unique position in the electronic basic industry, it has become an active industry in the contemporary electronic component industry, with an average annual growth rate of more than 5% since 2006, a year-on-year growth of 6.7% in 2008, and a year-on-year growth of 7.1% in 2009 , Reaching 171 million square meters. It is expected to exceed 200 million square meters in 2012. SMT is the surface mount technology (Surface Mounted Technology) (abbreviation of Surface Mounted Technology). It is a popular technology and process in the electronic assembly industry. It is mainly used to mount electronic components on the bare PCB. SMT process The process is printing (or dispensing) --> placement --> (curing) --> reflow soldering --> cleaning --> inspection --> rework, where the printing process is to miss the solder paste or patch glue To the pads of the PCB, prepare for the soldering of the components. In this link, SMT missed printing templates must be used, so the output value or output of PCB will affect the demand for SMT templates. This is also the main basis for us to estimate SMT laser missed templates based on PCB production and sales.