Maintenance and maintenance of CNC laser cutting machine

The maintenance and maintenance of the CNC laser cutting machine should be carried out from the following aspects: 　　 1. Check the steel belt frequently to ensure that it is tight. Otherwise, if there is a problem in operation, it may hurt people, or even cause death in serious cases. The steel belt looks like a small thing, but the problem is still a bit serious.　　2. Check the straightness of the track and the verticality of the machine every six months. If it is found to be abnormal, it will be maintained and debugged in time. If this is not done, the cutting effect may not be so good, the error will increase, and the cutting quality will be affected. This is the top priority and must be done.　　3. Use a vacuum cleaner to remove dust and dirt from the machine once a week. All electrical cabinets should be closed and dust-proof.　　4. The guide rails should be cleaned frequently to remove dust and other debris to ensure that the equipment is normal. The rack should be wiped frequently and lubricated to ensure lubrication without debris. The guide rail should be cleaned and lubricated frequently, and the motor should also be cleaned and lubricated frequently. The machine can move better and cut more accurately, and the quality of the cut products will be improved. .　　5. The dual-focus laser cutting head is a fragile item on the laser cutting machine. Long-term use will cause damage to the laser cutting head. Regular inspection and maintenance should be carried out. If there is any deformation or other forms, you should know that the laser cutting head is a bit damaged at this time and needs to be replaced. Failure to replace it will affect the cutting quality and increase the cost. Some products may have to undergo secondary processing and reduce production efficiency. The laser cutting head should be produced by a professional manufacturer, and it should be carefully checked when the product is purchased, so as to avoid problems when it is used.　　 When using a CNC laser cutting machine, you should not just focus on production, but also pay attention to the maintenance of the machine. In this way, you will be more comfortable when using it and create greater value.