Laser cutting machine has greatly improved work efficiency in the field of automobile manufacturing

Laser cutting technology is very important to many industries, especially the application in the field of automobile manufacturing, which greatly improves the work efficiency of the automobile manufacturing industry. Let's give you a brief introduction below.　　Most of the high-strength body parts are composed of silicon-aluminum-boron alloy steel, which is generally cut from the entire roll of steel strip. This cutting process can be done using a two-dimensional laser cutting machine. Its advantage is that it can be changed arbitrarily and flexibly without replacing expensive cutting dies. Laser processing can make the cutting layout of parts more compact and improve material utilization.　　Then the steel plate is heated in a heating furnace to make it easier to shape. The heated parts are rapidly cooled during the molding process, so that the tensile strength can reach about 1500Mpa. High-strength materials can indeed enhance the safety of passengers, but such high-strength materials, such as punching or trimming using traditional processing methods, will cause great loss to the mold, so the processing cost is greatly increased, and there is no price-performance ratio at all. This is why manufacturers are turning to 3D laser cutting machines to cut high-strength body parts.　　 After further processing, the structural components are welded together to form a body assembly. Therefore, 3D welding equipment composed of TruDisk laser and remote welding lens came into being. Laser marking barcodes ensure the traceability of products, and laser marking has the advantages of durability and high quality.　　The deep penetration welding seam on the axle is welded by laser. The advantage is that it can reduce the amount of heat input to the material to reduce the amount of deformation of the parts. By reducing the heat input of the material and the cooling control after welding, cracks can be avoided, and the bearing capacity of the axle parts can be enhanced at the same time. The quality of laser welding is so high that there is no need for subsequent mechanical finishing or other additional work. Overall, laser welding has reduced the production time of commercial vehicle axles by 40%.　　Laser is a production technology for producing high-performance batteries because they can play all their advantages when cutting and welding battery parts, such as battery casings or battery connectors. The non-contact processing technology makes the material's mechanical load-bearing capacity low, and the welding seam is not deformed, because the welding only uses a small amount of heat. Through high-quality and precise processing technology, laser technology can achieve the miniaturization of individual components, and can integrate more battery modules in a battery pack, thereby achieving the production of smaller and stronger batteries. Due to the high production capacity of laser equipment and few consumables, it can be mass-produced at a very competitive price, which is exactly what the automotive market needs.　　 Wuhan Gaoneng Laser Equipment Manufacturing Co., Ltd. is a high-tech enterprise integrating Ru0026D, production and sales of professional laser complete sets of equipment. Not only successfully developed laser equipment with advanced technology, but also used self-support import and export rights to promote products to more than forty global products including Hong Kong, South Korea, Vietnam, Malaysia, Thailand, Australia, the United States, Japan, Germany, the Netherlands, Jordan, etc. nation.