Introduction to the start-up preparation work of the laser cutting machine before use
In daily work, many industries rely heavily on laser cutting machines. In order to ensure the normal operation of the laser cutting machine and avoid accidents, the preparation work before the laser cutting machine starts working needs to be done. So what are the specific preparations before starting up? Let's give you a brief introduction. Before starting the laser cutting machine, you must do the following: 1. Check whether all the air pipe joints are loose and all the pipes are not damaged. Tighten or replace if necessary. 2. Loosen the tightening device and push the pulley with your hand to see if it comes and go freely. If there is any abnormality, adjust or replace it in time. 3. Check the power cabinet and operation platform, whether the fastening screws are loose, and clean the dust in the cabinet with a vacuum cleaner or a blower. Check if the wiring head is loose. 4. Check the performance of all buttons and selector switches, replace damaged ones, and finally draw a comprehensive inspection graph to test the accuracy of the machine. 5. Check whether all transmission parts are loose, check the meshing of gears and racks, and make adjustments if necessary. 6. Check whether there is rubbish at the main air inlet, and whether each valve and pressure gauge are working properly. 7. Check the clamping block, steel belt and guide wheel for looseness and looseness of the steel belt. Wuhan Gaoneng Laser Equipment Manufacturing Co., Ltd. is a high-tech enterprise integrating Ru0026D, production and sales of professional laser complete sets of equipment. Not only successfully developed laser equipment with advanced technology, but also used self-support import and export rights to promote products to more than forty global products including Hong Kong, South Korea, Vietnam, Malaysia, Thailand, Australia, the United States, Japan, Germany, the Netherlands, Jordan, etc. nation.