Introduction to the detection method of laser cutting machine bearings
For the laser cutting machine, the bearing is an important part of it. If there is a problem with the bearing, it will affect the normal operation of the laser cutting machine and bring great inconvenience to everyone's production work. Therefore, the bearings of the laser cutting machine need to be inspected frequently, so what is the inspection method? Let's take a look at it together. The idea of u200bu200binspection is mainly divided into 4 points: 1. Whether the steel stamp of the laser cutting machine is clear: The bearing body will be printed with brand words, labels, etc. The fonts are very small, but most of the products produced by the factory use steel stamping technology, and they are pressed before heat treatment. Therefore, although the fonts are small, they are deeply concave and very clear. The fonts of counterfeit products are not only blurred, because of the rough printing technology, the fonts float on the surface, and some of them can even be easily erased by hand. 2. Is there any noise in the laser cutting machine: Hold the inner sleeve of the bearing with your left hand, and rotate the outer sleeve with your right hand, and listen to whether there is any noise. Due to the backward production conditions of most counterfeit products and the completely hand-crafted workshop operation, it is inevitable that impurities such as sand will be mixed in the bearing body during the production process, so noise will be generated when rotating. This is the difference from a genuine brand that strictly enforces production standards and uses machines to operate. 3. Whether there are turbid oil traces on the surface: This should be paid special attention to when purchasing imported bearings. Since the current anti-rust technology in China is not very popular, it is easy to leave thick oil stains when anti-rust treatment on the bearing body. When it comes to the traces of anti-rust oil, a very careful expert said that the imported bearings smelled a kind of smell, it must be the anti-rust oil, but they can't see it. 4. Is the chamfer of the laser cutting machine uniform: the so-called chamfer of the bearing is the junction of the horizontal and vertical planes. Due to the limitation of production technology, the counterfeit bearings are not handled satisfactorily in these corners and corners. Wuhan Gaoneng Laser Equipment Manufacturing Co., Ltd. is a high-tech enterprise integrating Ru0026D, production and sales of professional laser complete sets of equipment. Not only successfully developed laser equipment with advanced technology, but also used self-support import and export rights to promote products to more than forty global products including Hong Kong, South Korea, Vietnam, Malaysia, Thailand, Australia, the United States, Japan, Germany, the Netherlands, Jordan, etc. nation.