Introduction of several main characteristics of laser cutting machine
The role of laser cutting machine in industry, agriculture and other fields is very large. Compared with the traditional cutting process, the cutting process of laser cutting machine is much more advanced. So what are the main characteristics of its laser cutting machine? Let me introduce the blow in detail. First of all, the cutting gap of the laser cutting machine is small, and the deformation of the workpiece is small when the workpiece is processed. The laser beam is focused into a small spot, so that a high power density is achieved at the focal point. At this time, the heat input by the beam far exceeds the part that is reflected, conducted or diffused by the material, and the material is quickly heated to the degree of vaporization, and evaporates to form a hole. As the beam and the material move relatively linearly, the holes continuously form slits with a very narrow width. The cutting edge is slightly affected by heat, and there is basically no deformation of the workpiece. Second, laser cutting is a non-contact processing with high energy and good density controllability. The laser beam is focused to form a very small point of action with extremely strong energy. There are many characteristics of applying it to cutting. First of all, the laser light energy is converted into amazing heat energy and kept in a very small area. The laser beam does not exert any force on the workpiece. It is a non-contact cutting tool, which means that the workpiece has no mechanical deformation, no tool wear, and no tool conversion problem. The cutting material does not need to consider its hardness, that is, laser cutting The ability is not affected by the hardness of the material being cut, and any hardness material can be cut. Moreover, the laser beam has strong controllability, high adaptability and flexibility, so it is convenient to combine with automation equipment, and it is easy to automate the cutting process; because there is no restriction on the cutting workpiece, the laser beam has unlimited profiling cutting capabilities ; Combined with the computer, the whole board can be laid out, saving materials. Finally, laser cutting has a wide range of adaptability and flexibility. Compared with other conventional processing methods, laser cutting has greater adaptability. First of all, compared with other thermal cutting methods, as a thermal cutting process, other methods cannot act on a very small area like a laser beam, resulting in a wide cut, a large heat-affected zone and obvious workpiece deformation. Lasers can cut non-metals while other thermal cutting methods cannot. Wuhan Gaoneng Laser Equipment Manufacturing Co., Ltd. is a high-tech enterprise integrating Ru0026D, production and sales of professional laser complete sets of equipment. Not only successfully developed laser equipment with advanced technology, but also used self-support import and export rights to promote products to more than forty global products including Hong Kong, South Korea, Vietnam, Malaysia, Thailand, Australia, the United States, Japan, Germany, the Netherlands, Jordan, etc. nation.