Introduction of daily maintenance work of metal laser cutting machine

Any product needs good maintenance to get a higher service life, this is a very important point. Because the metal laser cutting machine plays an important role in the daily production work, it is necessary to do the maintenance work as much as possible to avoid some problems. So how can the metal laser cutting machine be well maintained? Wuhan High Energy Laser will share with you the maintenance experience.　　 First of all, the guide rails should be cleaned frequently to remove dust and other debris to ensure that the equipment is normal. The rack should be wiped frequently and lubricated to ensure lubrication without debris. The guide rails should be cleaned and lubricated frequently, and the motor should be cleaned and lubricated frequently. The machine can move better and cut more accurately, and the quality of the cut products will be improved. .　　Secondly, check the steel belt frequently to ensure that it is tight. Otherwise, if there is a problem in operation, it may hurt people, or even cause death in serious cases. The steel belt looks like a small thing, but the problem is still a bit serious. Use a vacuum cleaner to remove dust and dirt from the machine once a week, and all electrical cabinets should be closed to prevent dust.　　 Then, check the straightness of the track and the verticality of the machine every six months, and if it is found to be abnormal, it will be maintained and debugged in time. If this is not done, the cutting effect may not be so good, the error will increase, and the cutting quality will be affected. This is the top priority and must be done.　　Finally, the dual-focus laser cutting head is a fragile item on the laser cutting machine. Long-term use will cause damage to the laser cutting head. Regular inspection and maintenance should be carried out. If there is any deformation or other forms, you should know that the laser cutting head is a bit damaged at this time and needs to be replaced. Failure to replace it will affect the cutting quality and increase the cost. Some products may have to undergo secondary processing and reduce production efficiency.　　Metal laser cutting machine also needs regular statistics on the usage of the machine. Regularly adhere to and record the parts of each part of the metal laser cutting machine, and quickly replace the parts that are not used well, and then let the metal laser cutting machine in a relaxed working environment, and do not let the damaged parts The use effect of the machine is dragged down.