How to stabilize the voltage when the laser cutting machine is working

by:Caodahai     2021-08-28
When the laser cutting machine is working, how to control the voltage stably is very important. This will have a great impact on the production activities of the enterprise. So how to stabilize the working voltage of the laser cutting machine? Let's learn together.   The acceleration voltage of the laser cutting machine is also increasing from zero to 70 V, and three drives are currently taking place. Emit electrons from the heater (wire) along the tube and obtain energy. Until they reach 18.7 eV, they cannot enrich the energy of neon atoms across the railroad, so they travel unhindered.   When electrons have the energy of 18.7 electric cars, a large number of them will collide with neon atoms and transfer their energy. These neon atoms will gain energy, but will even be mentally trained, lose their photon emission and return to ground level (this is actually a two-step process of neon lights).  The electrons, now running out of collisions in energy, will continue to gain more energy along the tube until it reaches 18.7 eV again, at which point they can collide with neon atoms and transfer their energy. This process continues until the electrons reach the anode. The 70-V acceleration potential, we will expect three moments, and three corresponding areas in the test tube where neon atoms emit light.   The electrons in the dark space directly above the lower grid are in Figure 2.6.3, accelerat-ing upwards away from the grid on the top of the tube. Laser cutting tubes processing them lack sufficient energy to excite the energy level of neon lights, so they retain their energy as they run along the tube. Eventually, they move upwards because they gain energy and have enough energy to ignite the first energy level of a neon sign. Therefore, the collision of laser cutting with neon atoms will cause energy transfer. The excited neon atoms emit light (the lowest band between the grids in the orange light photo). In doing so, there is a loss of energy.   Wuhan Gaoneng Laser Equipment Manufacturing Co., Ltd. is a high-tech enterprise integrating Ru0026D, production and sales of professional laser complete sets of equipment. Not only successfully developed laser equipment with advanced technology, but also used self-support import and export rights to promote products to more than forty global products including Hong Kong, South Korea, Vietnam, Malaysia, Thailand, Australia, the United States, Japan, Germany, the Netherlands, Jordan, etc. nation.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...