How to paint kitchen cabinets
I still like them but the door is yellow on the side and it\'s a form
The type of material becomes lighter.
I would like to draw them out and think that painting can have the best effect.
But how do I find a contractor to do the job?
ArlingtonAAsk painters about giving the kitchen cabinets a facelift, you get all sorts of ways from painting everything in place using paint and/or rollers and brushes, to remove the front of the door and drawer and its hardware and spray --
Draw those in the store.
Part of the \"best\" solution depends on the look and feel you want to achieve.
If your goal is to end the fresh looking cabinet in the employer, spray-
Painting is the best, because this is what the factory does.
A company that transforms old cabinets like this is Fresco & Faux in Reston (571-306-0880; www. frescofaux. com). Owner Shelly A.
Martin estimates that painting cabinets with 25 to 30 cabinet doors in a typical kitchen will cost $3,000 to $3,500.
Multiple colors or special paint effects will cost more.
Fresco & Faux brings doors and drawer fronts to the store for spraying.
It uses rollers and brushes to coat the face frame, the end of the cabinet and any other parts that need to be kept in place.
Merilat customer service department (866-850-8557; www. merillat.
Com) said paint should stick well to washing and etching doors, drawer front and surface frames coated with catalytic varnish (also known as conversion varnish.
But the representative said that the paint was not always glued to the laminate used at the end of the cabinet and suggested covering the material with thin wood materials such as plywood or wood skins.
Martin said that as long as the surface is clean, etched and painted with the right primer, she did not find it necessary. Spray-
The surface of the painting is very smooth, Martin said.
\"The finished door looks like a brand new door purchased in this color from the manufacturer!
She wrote in an emailmail.
\"The customer can then decide to keep it as it is, or to add a glazing process or any form of artificial finish as an additional decorative design, such as a cream door to install a chocolate glazing in a gap.
However, some homeowners don\'t want cabinets to look like factoriesfresh.
Instead, they want cabinets that look like traditional buildings.
Ins, usually drawn with a brush.
Rich Winkler, the owner of Richard T.
Winkler painting in Alexandria (703-836-4432; www.
Com) for providing spray
Painting on the front of the door and drawer, but the person doing this is no longer the company person, so now he draws with a brush and a roller.
\"Exquisite wood products
He said he noticed that he had recently visited a cabinet showroom and noticed that a showroom had a finish marked \"custom.
It\'s a brush-
Some strokes are still visible on the painting.
\"Many people like this,\" he said . \"
His general charge
The size of the kitchen is $1,500 to $3,000.
I wrote this article to mention the question about the foot of the phone Chair (October, \"how to fix the antique telephone operator stool \". 14).
It seems that if someone has a full foot and it falls off, this person can use 3-
This technology is useful in many small families.
Where can someone visit 3-D printer?
Good idea in Vienna. Yes, small 3-
Turn the plastic filament coil into a custom D printer
Molded parts can be used to manufacture various replacement parts.
Copy parts are more important than printers, though.
You need 3-
Scan an existing part or design part on a computer.
In addition to printing the design with plastic, you may want to shape the parts through a laser cutter, a CNC router, or other computer --
Control manufacturing tools.
A great place to start is the digital commons on the first floor of Martin Luther King.
Memorial Library in the district.
The Fab Lab that opened there last spring has equipment to do 3-
Scanning and printing, as well as other tools including laser cutting machines and CNC machines.
The center offers free classes and the cost of printing items is low, usually less than $5.
Once you know the basics, you may want to graduate from Nova Labs in Reston (571-313-8908; www. nova-labs. org).
Members can be contacted at the set time ($50 per month) or at all times of full-time membership ($100 per month.
Members are expected to help keep the place running.
If you \'d rather just focus on your own project, TechShop in Arlington (703-302-8780; www. techshop. ws/arlington.
Html) might be more suitable. It is a for-
Profit maker space equipped with professional equipmentcaliber tools.
The price of the member is $150 per month. Even non-
How can members take
But to work on your own project, you need to join.
Don\'t want to do it yourself, and don\'t need parts made of different materials?
Several web pages-
Headquarters Company offer 3-
Printing of various plastics as well as metals, ceramics and other materials.
Shapeway, based in New York (www. shapeways.
Com), can produce items made of stainless steel, gold, sterling silver and what it calls \"sandstone\"a gypsum-
A base material mixed with ink to make a full-color object.
The company\'s website also provides links to designers who can go from concept to printready file.
Sculpteo, an office of a French company in San Francisco (www. sculpteo.
Com), but also print ceramic objects that can be used as tableware.
Some local print shops also offer 3-D services.
Including the ABC headquarters office (202-429-8870; www. abcimaging.
Com) and UPS Store on Pennsylvania Avenue, Washington (202-543-0850; www. theupsstore. com).
A printing factory usually needs a ready-madeto-
Print digital files.
Is there a problem with your house?
Send test questions tolocalliving @ jobpost. com .
Enter \"how\" in the subject line, tell us where you live and try to include the photos.