How to judge whether the power of the metal laser cutting machine is down
The power drop of the metal laser cutting machine will directly affect the production efficiency of the enterprise. This will have an impact on the interests of the enterprise. Therefore, as an operator of a metal laser cutting machine, it is necessary to know how to judge whether the power of metal laser cutting has decreased. First we observe the color of the glass tube of the laser cutter generator. Of course, if we develop a pink color even at high power, then there must be something wrong with the generator. After the inspection work is completed, if the color of the laser generator glass tube is normal, but the laser power is slightly lower than the normal level with a special tool. We need to do generator leak inspection and thermal paper burning experiment. During the inspection, records must be made for analysis. During the thermal paper burning experiment, if the burned hole is not round and does not burn through, we can preliminarily determine that the power of the laser cutting machine has been reduced and the laser transmission angle mirror has shifted. The air leakage inspection of the laser cutting machine generator is a self-inspection of the air leakage of the machine tool under the operation of a technician. Under normal circumstances, the air leakage cannot be greater than 5 mbr/hour. If the air leakage is found to reach 54 mbr/hour, then the generator must be leaking. Wuhan Gaoneng Laser Equipment Manufacturing Co., Ltd. is a high-tech enterprise integrating Ru0026D, production and sales of professional laser complete sets of equipment. Not only successfully developed laser equipment with advanced technology, but also used self-support import and export rights to promote products to more than 40 global markets including Hong Kong, South Korea, Vietnam, Malaysia, Thailand, Australia, the United States, Japan, Germany, the Netherlands, Jordan, etc. nation.