How to grasp the use skills of fiber laser cutting machine?
How to grasp the use skills of fiber laser cutting machine? When using a fiber laser cutting machine to process objects, it is necessary to grasp some of the use skills of the fiber laser cutting machine equipment, so that the efficiency of the equipment can be better utilized and the work efficiency of the equipment can be improved to a greater extent. Let's take a look at the detailed introduction: 1) Check the steel belt frequently to ensure that it is tight. Otherwise, if there is a problem in operation, it may hurt people, or even cause death in serious cases. The steel belt looks like a small thing, but the problem is still a bit serious. 2) Check the straightness of the track and the verticality of the machine every six months, and if it is found to be abnormal, it will be maintained and debugged in time. If this is not done, the cutting effect may not be so good, the error will increase, and the cutting quality will be affected. This is the top priority and must be done. 3) Use a vacuum cleaner to vacuum the dust and dirt from the machine once a week. All electrical cabinets should be closed and dustproof. 4) The guide rails should be cleaned frequently to remove dust and other debris to ensure that the equipment is normal. The rack should be wiped frequently and lubricated to ensure lubrication without debris. The guide rails should be cleaned and lubricated frequently, and the motor should be cleaned and lubricated frequently. The machine can move better and cut more accurately, and the quality of the cut products will be improved. . 5) The dual-focus laser cutting head is a fragile item on the laser cutting machine. Long-term use will cause damage to the laser cutting head. Regular inspection and maintenance are required. If there is any deformation or other forms, you should know that the laser cutting head is a bit damaged at this time and needs to be replaced. Failure to replace it will affect the cutting quality and increase the cost. Some products may have to undergo secondary processing and reduce production efficiency. The laser cutting head needs to be produced by a professional manufacturer, and it must be carefully checked when it is purchased, so as to avoid problems when it is used.