Failure analysis and solution of fiber laser cutting machine
Fiber laser cutting machine is a kind of popular application equipment. In the process of use, some small failures are often encountered. Faced with these common failures, many customers who do not know about fiber laser cutting machines may be at a loss! Below! Wuhan High Energy Laser will discuss these faults and solutions with you. Faced with the sudden failure of the fiber laser cutting machine equipment, the operator must first remain calm, and then analyze the failure, whether the fiber laser cutting machine equipment is stuck, or indirectly stopped working, or completely stopped working , The first thing to do is to turn off the power, and then investigate and watch. There are many common faults for fiber laser cutting machines, such as the laser head does not emit light, the size of the fiber laser cutting machine is not within the range, and the fiber laser The cutting surface of the cutting machine is not smooth and so on. Let's solve the problem below. When the fiber laser cutting machine is working, suddenly no laser comes out. The first thing to do is to check whether the power cord is loose, then to insist on whether the laser power supply is damaged, and finally to check the laser tube. When there is a gap in the size of the laser cut, you need to check whether the settings in the fixed parameters of the laser device are normal, whether the parameters on the computer are correct, whether the pulse number is normal, etc. Finally, look at the settings of the drawing software in the disaster area. When the fiber laser cutting machine is cutting the workpiece surface is rough, you need to observe whether the cut material is within the range of the entire equipment, if it is, then you need to adjust the focus mirror of the fiber laser cutting machine to focus the light of the laser equipment thinner. Only to make the effect more obvious. The above are some of the more common faults and solutions of fiber laser cutting machines compiled by Wuhan High Energy Laser for everyone. If there are other problems that are difficult to solve, you can log in to the official website of Wuhan High Energy Laser at any time: http://www.gnlaser.com/Consultation Professional customer service.