Factors of fiber laser cutting machine cutting impenetrable sheet

In the process of using a fiber laser cutting machine, sometimes the cutting effect is not obvious, or even the workpiece cannot be cut through. Many people want to know where is the reason? Let's talk about the factors that cause this situation in the fiber laser cutting machine? The factors that cause the fiber laser cutting machine to cut through the workpiece are as follows: 1. The light exit of the maintenance laser tube: If the lens is damaged, Check and clean the lenses. If the lens is damaged, the lens should be replaced immediately. 2. During the launching of the laser beam, check whether the optical path is in the exact center. Whether there are the following phenomena: Whether it passes through the center, whether the part of the laser emission is blocked. When the laser passes through the hole, if it does not pass through the center of the hole, it will easily cause diffraction, which will reduce the laser power and the quality of the laser beam. The methods are: a. Increase the working current, but within the range that the laser tube can withstand. b. Replace the new laser tube. c. Reduce the spot size: reducing the spot size is more effective than increasing the working current of the laser tube or replacing a larger laser tube. It is suitable for most production and processing sites and has a lower cost. 3. The laser tube is deformed. Rotate the laser tube several times to choose the best support angle. Wuhan Gaoneng Laser Equipment Manufacturing Co., Ltd. is a high-tech enterprise integrating Ru0026D, production and sales of professional laser complete sets of equipment. Not only successfully developed laser equipment with advanced technology, but also used self-support import and export rights to promote products to more than forty global products including Hong Kong, South Korea, Vietnam, Malaysia, Thailand, Australia, the United States, Japan, Germany, the Netherlands, Jordan, etc. nation.