Common faults of laser cutting machines and their maintenance methods

The status of the laser cutting machine in daily production work is very important, but sometimes there are some failures in the laser cutting opportunity. If you don’t know how to check and eliminate the failures, it will affect your production work. Let’s analyze it for you. What are the common faults of laser cutting, and how to check and repair these faults.　　 1. The machine does not operate (no refrigeration or pump does not work). Check whether the power cord is connected to the power plug; check whether the power switch is turned on; check whether the panel power is turned on.　　2, the pump is not working properly. Check the liquid level of the entire system to ensure that the pump is receiving liquid; check whether the pump motor is running; check whether the circulation system is blocked; 　　3, the pump suction is insufficient. Check whether the voltage is too low; check whether the pipe diameter is too small; check whether the fluid viscosity is too high; check whether the connecting pipe is restricted.　　 4. No refrigeration or insufficient refrigeration. Check whether the voltage is too low or too high; check whether the ventilation is blocked; check the ambient temperature (too high ambient temperature will cause the refrigeration compressor to stop for a short time; check whether too much heat is transferred to the cooling liquid, because it will Exceed the cooling capacity of the refrigeration system. 　　 Wuhan High Energy Laser Equipment Manufacturing Co., Ltd. is a high-tech enterprise integrating Ru0026D, production and sales of professional laser complete sets of equipment. Not only has it successfully developed laser equipment with international advanced technology, but also used self-support Export right to promote products to more than 40 countries around the world, including Hong Kong, South Korea, Vietnam, Malaysia, Thailand, Australia, the United States, Japan, Germany, the Netherlands, Jordan, etc., occupying an absolute advantage in the international market in the same industry.