Application of small metal laser cutting machine in the field of pipe processing

The application of metal laser cutting machines in the field of pipe processing is very wide. Next, let's take a look at the application of small and medium-sized metal laser cutting machines in the field of pipe processing. When a small metal laser cutting machine is cutting pipes, the slag produced by cutting is easy to adhere to the inner wall of the pipe, because most of the heat generated during cutting is basically absorbed by the material, so when the density of the cut material is large, it is often The phenomenon of overheating of the cut tube has caused the corners and the four corners of the square tube to burn seriously, which seriously affects the quality of the material cut, and even if it is serious, the material cannot be cut.　　The following methods can be used to correct such problems: First, keep the height of the cutting nozzle and the surface of the material unchanged, so that the cutting effect will not change with the change of the material surface. Then increase the pressure of the auxiliary gas oxygen used, so as to increase the speed of sharp corner synthesis through the supporting control software. 　　Professional tube nesting technology improves the cutting tube cutting of the laser cutting machine, and the programming nesting of the metal laser cutting machine is very complicated. , If an operating error occurs, it is easy to cause pipe waste and cutting efficiency. Therefore, we must pre-program drawing, nesting, and blanking segmentation on the computer through the professional operation of the pipe cutting and nesting software. The cutting program is generated in advance, and then the laser cutting of the full-stroke automatic blanking of the elongated metal pipe is carried out. Only through professional pipe nesting software can the CNC pipe cutting machine achieve mass, high efficiency, and high quality cutting production. This is the basis and prerequisite. CNC laser cutting technology CNC laser cutting is a large-scale, high-efficiency, high-quality cutting of pipes. The most effective way to produce, the core of CNC laser cutting is the CNC laser cutting system.　　 Wuhan Gaoneng Laser Equipment Manufacturing Co., Ltd. is a high-tech enterprise integrating Ru0026D, production and sales of professional laser complete sets of equipment. Not only successfully developed laser equipment with advanced technology, but also used self-support import and export rights to promote products to more than forty global products including Hong Kong, South Korea, Vietnam, Malaysia, Thailand, Australia, the United States, Japan, Germany, the Netherlands, Jordan, etc. nation.