Analysis of processing ability of fiber laser cutting machine with different power

by:Caodahai     2021-08-20
The working principle of the fiber laser cutting machine is to generate laser light through a laser, and then transmit the laser light to the cutting head through the optical path, and then focus. The focused focal point has a high unit energy density, and the high-density energy focus acts on the metal to be cut. On the surface, a very high temperature is generated, the metal is melted instantly, and the slag is blown off with auxiliary gas to form a cutting seam to achieve the purpose of cutting. However, the cutting performance of fiber laser cutting machines with different powers on workpieces of different thicknesses is also different. Let us give you a brief introduction below. There are many types of laser cutting machines, mainly because their laser generators are different and the principles are the same. Different power laser generators determine the performance of the laser cutting machine. There are many types of fiber laser cutting machines in the market. The technology is also uneven. The power of cutting 0.5MM to 20MM metal sheets also ranges from 400W to 4000W. The cutting speeds of various manufacturers are also similar. But it is certain that the price The higher the quality, the better in the eyes of most manufacturers. Imports are better than domestic products. 400W fiber optic machine is suitable for cutting plates below 4MM. The cutting speed can reach about 8 meters per minute (take 1MM stainless steel as an example). 500W or There is not much difference between 600W and 600W. Fiber laser cutting machines with this power have only been developed in the past few years. The cutting speed is much faster than 400W. It should reach about 10 meters. The 1000W fiber laser cutting machine is suitable for cutting boards below 6MM. Of course, cutting thicker is not impossible, but the cutting speed is slow and the loss of the laser is large, so it is not recommended to buy. The 2000W fiber laser cutting machine has been put into use in the market. The price can still meet the needs of customers, that is, it is not wasteful or not enough. It is very popular in the market. 3000W-4000W is not so much invested in the market compared to 200W fiber laser cutting machines. Because the price is too high. Although the speed is fast enough and the cutting quality is good enough. Compared with the same power CO2 laser cutting machine, it will not choose a fiber laser cutting machine. Wuhan Gaoneng Laser Equipment Manufacturing Co., Ltd. is a professional laser complete set of equipment research and development, production and production. A high-tech enterprise integrating sales. Not only successfully developed laser equipment with advanced technology, but also used self-support import and export rights to promote products to more than forty global markets including Hong Kong, South Korea, Vietnam, Malaysia, Thailand, Australia, the United States, Japan, Germany, the Netherlands, Jordan, etc. nation
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...